Mechanics Books


Gas Turbine Engineering Handbook, Third Edition Best Price: $110.93 This book covers everything about gas turbines, from bearings to IGVs, and from vibrations to...	Practical Metallurgy and Materials of Industry (6th Edition) Best Price: $76.85 I'm a GED teacher w/ a bs in geology and a ms in geological engineering who has gone back to...	HVAC Equations, Data and Rules of Thumb Best Price: $11.99 This is a handy desktop information tool. I use it frequently while designing HVAC and other...	Sport Compact Car Engine & Driveline Handbook Best Price: $4.30 No real information here minus engine conversions. If you have a silvia and youd like to convert...	Sound and Vibrations of Positive Displacement Compressors Best Price: $139.95 Positive displacement compressors are the most common type of compressor for commercial...



Thermal Environmental Engineering (3rd Edition) Best Price: $135.62 I have rated this book as fai	Explosives Engineering Best Price: $112.00 If you are a novice to the field of explosives engineering, this text should be read after...	Compact Heat Exchangers Best Price: $44.88 As a chemical engineer I've had limited use for this book. Kays addresses an area of heat...	Piping Handbook Best Price: $97.10 One more handbook that is almost useless. Lots of words, but almost no meat. Don't buy it:...	Quality Function Deployment: How to Make QFD Work for You (Engineering Process Improvement Series) Best Price: $38.19 Quality Function Deployment is an excellent tool for mapping market requirements into product...



Explosives Engineering Best Price: $112.00 If you are a novice to the field of explosives engineering, this text should be read after...	Compact Heat Exchangers Best Price: $44.88 As a chemical engineer I've had limited use for this book. Kays addresses an area of heat...	Piping Handbook Best Price: $97.10 One more handbook that is almost useless. Lots of words, but almost no meat. Don't buy it:...	Quality Function Deployment: How to Make QFD Work for You (Engineering Process Improvement Series) Best Price: $38.19 Quality Function Deployment is an excellent tool for mapping market requirements into product...	Handbook of Brain Connectivity (Understanding Complex Systems) Best Price: $94.70 Our contemporary understanding of brain function is deeply rooted in the ideas of the nonlinear...

Design of Machine Elements (8th Edition) Best Price: $110.48 I used this book for my ME courses 20+ years ago (6th edition). It was OK, i.e., very average,...	Engineering Dynamics: A Primer Best Price: $47.79 I would recomend for a reference, not a textbook to learn "new" material. This book...	Fundamentals of Thermodynamics, Work Example Supplement Best Price: $18.99 For the past three decades, Sonntag, Borgnakke, and Van Wylen's FUNDAMENTALS OF THERMODYNAMICS...	Energy: Its Use and the Environment Best Price: $37.12 The book was all beat up, but the seller said it would be. It was a ton cheaper than buying it...	The Technology of Metallurgy (Merrill's International Series in Engineering Technology) Best Price: $100.00 For first courses in metallurgy and materials science. Here is a straightforward,...

Quality Control (7th Edition) Best Price: $13.99 If you only buy one book on the application of statistics and probability to the creation of...	Manufacturing Processes for the Technician (2nd Edition) Best Price: $55.56 Examines the processes by which things can be made. The newest manufacturing techniques are...	Engineering Analysis with ANSYS Software Best Price: $34.44 For all engineers and students coming to finite element analysis or to ANSYS software for the...	Engines, Energy and Entropy: A Thermodynamics Primer Having made several attempts to understand thermo, ever since first struggling to grasp its...	The Science of Energy: A Cultural History of Energy Physics in Victorian Britain Best Price: $21.97 Crosbie Smith charts the rise of the concept of energy through the 19th century to its...

Engineering Fundamentals: An Introduction to Engineering Best Price: $38.97 ship is so quick. just took about 4days to get to my home, and the book look awesome.	An Introduction to the Mechanics of Solids: Second Edition with SI Units Best Price: $137.07 This text is concerned with the mechanics of rigid and deformable solids in equilibrium. It has...	MC68HC12 An Introduction: Software and Hardware Interfacing Best Price: $83.89 I use this book to teach a junior/senior-level microcontroller class. Actually, there's enough...	An Introduction to Mechanical Engineering Best Price: $43.95 i think its quite helpful for those who want to understand mech engineering. it tells you what...	Mechanisms and Mechanical Devices Sourcebook Best Price: $135.00 This book only illustrated very specific mechanisms. Not what I expected. I do not recommend it.

An Introduction to AI Robotics (Intelligent Robotics and Autonomous Agents) Best Price: $46.99 I'm not sure what chip "A reader" had on his/her shoulder with the earlier review. I...	System Dynamics (Mcgraw-Hill Series in Mechanical Engineering) Best Price: $160.46 William Palm's System Dynamics is a major new entry in this course offered for Mechanical,...	Steam Tables: Thermodynamic Properties of Water Including Vapor, Liquid & Solid Phases Best Price: $394.69 Generations of engineers, and not a few chemists and physicists either, have depended on this...	Finite Element Modeling for Stress Analysis Best Price: $55.00 Let me start out by saying that an excellent starter book on FEA has yet to be written. It's a...	Fluid Mechanics Best Price: $57.00 This text is intended for the study of fluid mechanics at an intermediate level. The...

AVR: An Introductory Course Best Price: $29.84 This book is pretty-much what I expected it to be, so I made the right purchase. It introduces...	Mechanics of Materials Best Price: $14.34 I bought this book for Mech. of Material class because this is the required textbook. I managed...	Performance Ignition Systems HP1306: Electric or Breaker-Point Ignition System Tuning for MaximumPerformance, Power and Economy Best Price: $11.00 If you're looking for "how to pick the best ignition system for your car", this isn't...	Vibration Analysis for Electronic Equipment Best Price: $131.10 The author is obviously an engineer who understands the everyday practical problems a dynamicist...	The Pursuit of New Product Development: The Business Development Process Best Price: $50.00 Product Development begins with an understanding of market needs, within a sound business model,...

Pump Characteristics and Applications, Second Edition (Mechanical Engineering (Marcell Dekker)) Best Price: $79.96 Superlatives do not begin to describe how much this book means to me. I though I knew...	Mechanical Engineering PE Sample Exam (Pe Exam Preparation) Best Price: $34.09	The NALCO Guide to Boiler Failure Analysis Best Price: $51.68 This book is a need item to help trouble shoot problems with boiler, DA tanks, condensate return...	Computer-Aided Fixture Design: Manufacturing Engineering and Materials Processing Series/55 (Manufacturing Engineering and Materials Processing) Best Price: $171.22 I d?dnt see your book but ? am sure ?t ?s a good book about th?s subjec	Basic Drafting Using Pencil Sketches and AutoCAD Best Price: $65.00 Totally self-contained, this book covers drawing fundamentals for creating both sketches and...

Statistical Thermodynamics: Fundamentals and Applications Best Price: $54.77 Building on the Maxwell-Boltzmann method of step-by-step development of the subject, this book...	Analytical Dynamics Best Price: $174.56 This book is OK. For a graduate level text, I found that it lacked rigor and difficult...	Machine Devices and Components Illustrated Sourcebook Best Price: $61.52 Good and intructive pictures of different mechaical movements. Pitty that Amozon is cheep whith...	Mechanical Engineering Principles Best Price: $34.15 As a novice with an interest in engineering I find the book challenging, albeit a little...	Engineering Design Process Best Price: $47.24 This book blatantly plagiarises material from 'Engineering Design Methods' by Nigel Cross....

Foundations of Ultra-Precision Mechanism Design (Developments in Nanotechnology, Vol 2) Best Price: $60.07 Smith & Chetwynd's book covers many of the fundamental design considerations for ...	The Finite Element Method for Engineers Best Price: $106.14 This book is a gem. It explains the fundamentals underlying FEM and also has examples of...	Measurement in Fluid Mechanics Best Price: $92.34 This is an ideal textbook and reference in experimental fluid mechanics for anyone wishing to...	The Dynamics of Marine Craft: Maneuvering and Seakeeping Best Price: $40.18 This book presents a theoretical treatment, as well as a summary of practical methods of...	The John Zink Combustion Handbook (Industrial Combustion Series) Best Price: $143.96 This is a must have for anyone involved in the combustion industry. It covers the essentials of...

Heat Conduction, 2nd Edition Best Price: $154.00 This is by far my favorite book on conduction.Very clear exposition on all topics raging from...	An Introduction to Continuum Mechanics (Mathematics in Science and Engineering) Best Price: $119.00 Regarding math in this book, I compeletly disagree with the reviewer from Rotterdam. Gurtin...	Simulation Modeling and Analysis with ARENA Best Price: $63.98 Simulation Modeling and Analysis with Arena is a highly readable textbook which treats the...	Sea Loads on Ships and Offshore Structures (Cambridge Ocean Technology Series) Best Price: $50.06 After many years in industry I have joined the ranks of university lecturers. I have found...

4 5 6 7 8 9 10 11 12 13

See also for Mechanics Books

Civil